SeaNova – between the hammer and the anvil 

Today I finished cleaning out the hull and encapsulated the wood of the hull in epoxy.

Now we turn to the interior build out.

Well, I cleaned up the inside of the hull today. In preparation for epxoy coating the interior of the hull, I ground flat all exposed screws and cut all gussets away from the limber channels. Once epoxied, the hull will be encapsulated. Then it’s on to the interior….

OK, the paint is done and everything is just about done. We still need to carpet the bunks, install some diamond plate on the steps and wire the thing, but Bob (there in the background) is done. I think it looks rather good…:

Here’s another view: